--- title: "Cantilever Rack in Bedford Heights, OH | Steel Storage" url: https://clevelandpalletrack.com/service-area/bedford-heights/cantilever-rack description: "Plan Bedford Heights cantilever rack for steel lengths with rated arms, clear pallet access and coordinated installation. Call (216) 434-6607." lang: en --- Image: Cantilever Rack system inside a Ohio warehouse (https://clevelandpalletrack.com/__l5e/assets-v1/9a42a76e-9484-4c1b-bf56-566d0f9fcb0a/cantilever-hero.jpg) Bedford Heights, Ohio # Cantilever Rack in Bedford Heights, OH Cantilever rack in Bedford Heights gives steel lengths dedicated supports instead of leaving them across access to palletized stock. Open-front arms project from uprights with no front columns between picking positions. Bar, tube, pipe and other extended materials can then be approached across their supported length rather than forced into pallet-sized openings. A cantilever rack proposal starts with bundle weights and retained cut lengths. Arm projection, bearing points and upright loading must fit those materials while preserving room for loaded-truck withdrawal. (216) 434-6607 ## Cantilever Rack Supply Sequenced with Receiving Document weights and dimensions for bar, pipe, tube and lumber held on arms. Identify sheet packs separately so any required approved support arrangement is included instead of assuming narrow-stock supports will suit them. Measure the proposed route from unloading to storage and onward to cutting or fabrication. Reserve space for alignment with the arms, keeping the carried load away from pallet picking approaches and nearby work positions. Confirm new equipment components as an assembly, including arm elevations, upright spacing and loading information. Assign position labels that distinguish heavier stock and shorter pieces requiring a different bearing pattern. Coordinate delivery drops and installation work with receiving personnel. Establish a component holding area, then review installed placement and the intended loading configuration before transferring steel from temporary positions into the completed row. Compare long-stock access with the separate needs of pallet reserve and small-parts picking. Bedford Heights storage equipment: https://clevelandpalletrack.com/service-area/bedford-heights Cantilever loading and support options: https://clevelandpalletrack.com/products/cantilever-rack Pallet flow for sequenced wholesale stock: https://clevelandpalletrack.com/service-area/bedford-heights/pallet-flow-rack Drive-in for wholesale pallet reserves: https://clevelandpalletrack.com/service-area/bedford-heights/drive-in-rack Heavy bar bundles with verified weight distribution Pipe and tube separated from wholesale pallet approaches Tool-and-die stock retained in multiple lengths Lumber and sheet packs with application-specific bearing support Call (216) 434-6607: (216) 434-6607 ## Why Cantilever Rack Capacity Matters for Fabrication Stock We review long steel independently from wholesale pallets. Selective rack offers direct access to palletized goods, while cantilever racking serves material that needs several unobstructed bearing positions. Separating those roles can restore pallet approaches without shifting the steel obstruction into another working aisle. Heavy loads need a documented configuration, not a capacity inferred from a neighboring row. We consider bundle contact points, uneven loading and the ratings of both arms and uprights. Short remnants also belong in the review because a full-length support pattern may not hold them adequately. Cleveland Pallet Rack is part of Warehouse Equipment & Supplies Co., a supplying and installing business active since 1997. This division provides new equipment and coordinates the layout, component schedule and installation access around the intended material-handling method. Free warehouse consultation CAD layout with position counts Installation by experienced crews we schedule and manage Image: Cantilever warehouse racking holding steel tubing (https://clevelandpalletrack.com/__l5e/assets-v1/267496b9-61c8-4aaf-a0ab-333060575520/cantilever-2b.jpg) Image: Cantilever rack storing lumber and wood products (https://clevelandpalletrack.com/__l5e/assets-v1/37b9c545-1582-4e39-9e5f-241c05812a21/cantilever-3b.jpg) ### Steel Lengths Near Bedford Heights Receiving Routes Northfield Road industrial buildings and the Rockside Road corridor serve metal fabrication, tool-and-die work and wholesale distribution. Where receiving and production share limited space, long steel should not block approaches to pallet positions. Storage rack design can set aside a defined long-stock zone while installation planning coordinates material drops with the receiving activity already using those building approaches. metal fabrication wholesale distribution ## Cantilever Racking Mechanics for Heavy Lengths Evaluate bundle bearing before choosing height, storage levels or handling orientation. 1 ### Arm reach matched to the bundle Use bundle depth and the manufacturer's placement requirements to establish arm length. Capacity must correspond to that projection and loading condition. Stock should rest in its intended bearing zone, not depend on unsupported depth or improvised placement at an arm end. 2 ### Support spacing and concentrated loads Set upright spacing for the retained material lengths and their stiffness. A heavy bundle may not distribute weight equally over every arm beneath it. Check individual support loads and total upright loading rather than dividing bundle weight by an assumed support count. 3 ### Aisles around each working face Single-sided configurations can serve a perimeter storage zone; double-sided rows make stock available from opposite aisles. Include base dimensions and both loading approaches when comparing layouts. More working faces do not help if adjacent pallet access is obstructed. 4 ### Loaded-truck movement and exposure Check forklift sweep at row ends and receiving approaches with the longest steel carried. A side-loader can change the required movement but still needs measured clearance. Indoor versus outdoor placement also affects finish selection and the review of weather exposure. ## Recent Installations Racking projects completed for warehouses across Greater Cleveland and Northeast Ohio. Image: Pallet rack installation (https://clevelandpalletrack.com/__l5e/assets-v1/9e6d591a-1b42-4328-8d0c-3ff129072082/project-orange-blue-rack.jpg) Image: Pallet rack installation (https://clevelandpalletrack.com/__l5e/assets-v1/e271d582-2fce-4cff-97da-462ddab27097/project-blue-tall-rack.jpg) Image: Pallet rack installation (https://clevelandpalletrack.com/__l5e/assets-v1/ec5ca081-4183-457a-914c-fb74a5815fa2/project-dc-aisle.jpg) Image: Pallet rack installation (https://clevelandpalletrack.com/__l5e/assets-v1/9bee7a3e-6b3b-4d2b-8863-c37f0e1dd966/project-distribution-center.jpg) Image: Pallet rack installation (https://clevelandpalletrack.com/__l5e/assets-v1/880d5178-c293-49a2-82ae-3365f0c1628c/project-drive-in.jpg) Image: Pallet rack installation (https://clevelandpalletrack.com/__l5e/assets-v1/91e4b43a-9eb0-4105-9d30-657028a00c91/project-loaded-aisle.jpg) Image: Pallet rack installation (https://clevelandpalletrack.com/__l5e/assets-v1/e1312ce4-7800-4267-82fd-dd273b917f2a/project-igt-install.jpg) Image: Pallet rack installation (https://clevelandpalletrack.com/__l5e/assets-v1/259a43d6-5be8-4f8e-920d-5c0dcdcf44a4/project-wire-deck.jpg) Image: Pallet rack installation (https://clevelandpalletrack.com/__l5e/assets-v1/aa0a820f-d334-4983-9a3f-a2435e8bb4aa/project-shelving-bays.jpg) Image: Pallet rack installation (https://clevelandpalletrack.com/__l5e/assets-v1/b572c5bc-8d66-4163-afa0-d13a2eb10eef/project-green-orange-rack.jpg) View More Projects: https://clevelandpalletrack.com/projects ## Get a Cantilever Rack Quote for Your Bedford Heights Warehouse Start your Bedford Heights inquiry with steel bundle dimensions and the receiving area available for assembly. ### Cleveland Pallet Rack 11811 Shaker Blvd. Ste 204 #1118 Cleveland, OH 44120 (216) 434-6607 Monday - Friday: 8:00 AM - 6:00 PM ## Bedford Heights Steel-Storage FAQs ### How should Bedford Heights fabricators document a heavy bundle? ### Can a new long-stock row preserve access to wholesale pallets? ### Is dividing bundle weight by the number of arms sufficient? ### Where do short cut pieces belong after fabrication? ## Other Rack Types We Supply in Bedford Heights ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://clevelandpalletrack.com/service-area/bedford-heights ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://clevelandpalletrack.com/service-area/bedford-heights/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://clevelandpalletrack.com/service-area/bedford-heights/pallet-flow-rack ### Drive-In Rack No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system. View details https://clevelandpalletrack.com/service-area/bedford-heights/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://clevelandpalletrack.com/service-area/bedford-heights/carton-flow-rack ### Warehouse Relocation Teardown, identify, transfer and reinstall your storage systems with a plan for the new building. View details https://clevelandpalletrack.com/service-area/bedford-heights/warehouse-relocation ## Nearby Areas We Also Serve Our coverage extends beyond Bedford Heights to the industrial communities shown below. Cantilever Rack in Cleveland: https://clevelandpalletrack.com/service-area/cleveland/cantilever-rack Cantilever Rack in Akron: https://clevelandpalletrack.com/service-area/akron/cantilever-rack Cantilever Rack in Canton: https://clevelandpalletrack.com/service-area/canton/cantilever-rack Cantilever Rack in Lorain: https://clevelandpalletrack.com/service-area/lorain/cantilever-rack Cantilever Rack in Elyria: https://clevelandpalletrack.com/service-area/elyria/cantilever-rack Cantilever Rack in Mentor: https://clevelandpalletrack.com/service-area/mentor/cantilever-rack View All Service Areas: https://clevelandpalletrack.com/service-area ## Where We Work Located in Cleveland, we serve the entire Northeast Ohio with industrial pallet racks and warehouse storage solutions. ### Cleveland Pallet Rack #### Address 11811 Shaker Blvd. Ste 204 #1118 Cleveland, OH 44120 #### Phone (216) 434-6607 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Cantilever Rack in Bedford Heights? Call (216) 434-6607 or request a quote and we will get a layout started. (216) 434-6607 Tap to Call: (216) 434-6607 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://clevelandpalletrack.com/#business", "name": "Cleveland Pallet Rack", "alternateName": "Cleveland Pallet Rack - A Division of Warehouse Equipment & Supplies Co.", "description": "Industrial pallet racks and warehouse racking solutions in Greater Cleveland and Northeast Ohio. Free warehouse design consultations, pallet rack installation, and storage optimization services.", "url": "https://clevelandpalletrack.com", "telephone": "(216) 434-6607", "address": { "@type": "PostalAddress", "streetAddress": "11811 Shaker Blvd.", "addressLocality": "Cleveland", "addressRegion": "OH", "postalCode": "44120", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": "41.4993", "longitude": "-81.6944" }, "areaServed": { "@type": "City", "name": "Bedford Heights", "containedInPlace": { "@type": "State", "name": "Ohio" } }, "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "17:00" } ], "priceRange": "$$", "paymentAccepted": "Cash, Credit Card, Check", "image": "https://clevelandpalletrack.com/images/logo.png", "sameAs": [ "https://facebook.com/clevelandpalletrack", "https://linkedin.com/company/clevelandpalletrack", "https://instagram.com/clevelandpalletrack" ], "hasOfferCatalog": { "@type": "OfferCatalog", "name": "Pallet Rack Systems", "itemListElement": [ { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Selective Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Push Back Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Drive-In Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Warehouse Design Consultation" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Pallet Rack Installation" } } ] } }, { "@context": "https://schema.org", "@type": "Service", "@id": "https://clevelandpalletrack.com/service-area/bedford-heights/cantilever-rack#service", "name": "Cantilever Rack in Bedford Heights", "serviceType": "Cantilever Rack in Bedford Heights", "url": "https://clevelandpalletrack.com/service-area/bedford-heights/cantilever-rack", "provider": { "@type": "LocalBusiness", "@id": "https://clevelandpalletrack.com/#business", "name": "Cleveland Pallet Rack", "telephone": "(216) 434-6607", "address": { "@type": "PostalAddress", "streetAddress": "11811 Shaker Blvd., Ste 204 #1118", "addressLocality": "Cleveland", "addressRegion": "OH", "postalCode": "44120", "addressCountry": "US" } }, "areaServed": [ { "@type": "City", "name": "Bedford Heights", "containedInPlace": { "@type": "State", "name": "Ohio" } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://clevelandpalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://clevelandpalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Bedford Heights", "item": "https://clevelandpalletrack.com/service-area/bedford-heights" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://clevelandpalletrack.com/service-area/bedford-heights/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "How should Bedford Heights fabricators document a heavy bundle?", "acceptedAnswer": { "@type": "Answer", "text": "Record its actual weight, length, depth and expected contact points. Include the heaviest receipt and partial-bundle handling. Those details allow the arm and upright configuration to be assessed without borrowing assumptions from pallet storage elsewhere in the building." } }, { "@type": "Question", "name": "Can a new long-stock row preserve access to wholesale pallets?", "acceptedAnswer": { "@type": "Answer", "text": "It can be planned for that purpose, but the loaded-truck path must be checked. Position the row so placing steel does not occupy the same approach required to retrieve pallets, including turns near receiving doors." } }, { "@type": "Question", "name": "Is dividing bundle weight by the number of arms sufficient?", "acceptedAnswer": { "@type": "Answer", "text": "No. Contact may be uneven, and not every arm necessarily carries an equal share. Evaluate the specified loading condition, individual component limits and upright capacity together before assigning a bundle to a level." } }, { "@type": "Question", "name": "Where do short cut pieces belong after fabrication?", "acceptedAnswer": { "@type": "Answer", "text": "Use designated positions whose support spacing suits those lengths. A remnant that no longer reaches the necessary arms should not return to its former full-length location. Clear length identification helps keep that distinction visible during picking." } } ] } ] ```