Our Elyria plant has low clear height. Can drive-in rack still help?

Often, yes. Density comes from removing aisles, not only from height, so even a 14 to 24 foot building can gain positions. We check how many rail levels your forklifts can reach.

Should we use drive-in or pushback near SR-57?

Drive-in suits many pallets of few SKUs. Pushback suits more SKUs with fewer pallets each, and lets drivers stay in the aisle. Your inventory profile decides it.

Do we need drive-thru racking for production parts?

Only if strict first-in, first-out rotation matters and you can give up an aisle at both ends. Many Elyria parts can run last-in, first-out without issue.

Will our current forklifts fit the lanes?

We measure your trucks before designing anything. Lane width, rail height and guide placement are set to the fleet you run, or to a planned replacement.

Drive-In Rack system inside a Ohio warehouse

Elyria, Ohio

Drive-In Rack in Elyria, OH

Name: Cleveland Pallet Rack
Address: 11811 Shaker Blvd., Cleveland, OH, 44120, US
Telephone: (216) 434-6607
Price range: $$

Drive-in rack in Elyria makes sense when a building holds many pallets of only a few items. Instead of an aisle for every row, forklifts drive straight into the lanes and set loads on rails running along each side.

You give up access to every single pallet. In exchange, you can store far more pallets in the same floor area than selective rack allows.

(216) 434-6607

How Drive-In Rack Lanes Work

The structure looks simple, but every dimension is tied to your pallets and your trucks.

Rails instead of beams

Pallets rest on continuous load rails attached to the uprights. There are no front beams inside the lane, which is what lets the truck enter.

Last in, first out

A drive-in lane is loaded and unloaded from one end, so whichever load went in most recently comes out before the rest. It suits stock that does not need strict date rotation.

Drive-thru option

Drive-thru racking opens both ends. Loads go in one side and come out the other, giving first-in, first-out flow at the cost of a second aisle.

Floor guides

Guide rails at floor level keep the forklift centered in the lane and protect uprights from wheel and mast contact.

Is Drive-In Pallet Rack Right for Your Elyria Building?

Industrial equipment makers and component distributors along SR-57 often stock a few production parts or finished units in deep quantities. When each SKU fills several pallets, a lane four to eight deep stays full and earns its space.

If your SKU list is long and each item has only one or two pallets, drive-in is the wrong tool. Pallets get buried, and drivers spend time moving loads to reach the one they need. Pushback or selective rack serves that profile better.

Elyria projects run through our parent, Warehouse Equipment & Supplies Co.; this team is its division, and the company has put in pallet storage since 1997. We will tell you plainly when a denser system will not pay off.

Free warehouse consultation

CAD layout with position counts

Installation by experienced crews we schedule and manage

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

Elyria Plants, Corridors and Lane Layout

Much of Elyria's industrial stock is older factory space where ceilings run 14 to 24 feet and column grids are tight, often around crane bays. Drive-in lanes must line up between columns, so we measure the grid first and fit lane widths to it. Plants near SR-57, I-90 and the Ohio Turnpike also tend to serve both production lines and outbound trucks, which means replenishment paths to the line have to stay open beside the dense block.

industrial equipment

component distribution

Sizing Drive-In Rack for Elyria Forklifts and Loads

Forklift fit decides the design. We measure the truck's overall width, mast and overhead guard height, and the lift needed for the uppermost rail level. Lane width is set so the truck clears the uprights with room for the operator to work without scraping.

Pallet consistency matters. Drive-in rails support the pallet along its edges, so the pallets you actually use must be measured and checked for damage. Mixed sizes or broken bottom boards cause trouble deep in a lane.

Lane depth comes from pallets per SKU. We look at how many pallets of each item you hold and how quickly they turn, then set depth so lanes empty fully rather than holding a few old loads at the back.

Cooler and freezer space is another common use. Cold rooms are expensive to run, so packing more pallets into them pays back quickly. In those buildings, we specify cold-rated components and plan installation around the room's operating schedule.

Installation is done by experienced crews we schedule and manage. They anchor uprights, set rails level and confirm guide alignment before the system goes into use.

Compare dense storage choices for Elyria:

Elyria service area Drive-in rack overview Elyria pushback rack Elyria pallet flow rack

Many pallets of a small number of SKUs

Production parts held in deep quantity

Cooler and freezer rooms

Older plants where floor space is limited

Call (216) 434-6607

Recent Installations

Racking projects completed for warehouses across Greater Cleveland and Northeast Ohio.

View More Projects

Get a Drive-In Rack Quote for Your Elyria Warehouse

Weighing a dense storage block for an Elyria plant? Send your SKU counts, pallet sizes and forklift model, and we will set up a free design consultation.