Can one row accommodate bar and thin-wall tube?

It can if each material has suitable support spacing and assigned loading limits. Thin-wall tube may need closer supports even when its weight is lower. Separate levels or sections can make those differences easier to manage.

How do banding and bearers affect arm selection?

Bearers determine where a bundle contacts the arms, and banding does not guarantee equal weight sharing. Include bearer positions and pack depth in the specification. Check the condition after bands are removed if loose stock will remain stored.

Should a Canton pipe operation choose single-sided rows?

Choose by access rather than location alone. Perimeter storage often favors one loading face, while an interior row may justify two. Compare withdrawal room and travel routes before deciding whether the second face is useful.

Can flat sheet packs rest directly on the arms?

That depends on stiffness, packaging and required bearing area. Some packs need a suitable continuous support arrangement, while others belong in a different storage system. Confirm the sheet handling method before assigning an open-arm position.

Cantilever Rack system inside a Ohio warehouse

Canton, Ohio

Cantilever Rack in Canton, OH

Name: Cleveland Pallet Rack
Address: 11811 Shaker Blvd., Cleveland, OH, 44120, US
Telephone: (216) 434-6607
Price range: $$

Cantilever rack in Canton separates bar stock and fabricated lengths from the floor while leaving the loading face open. Uprights carry projecting arms, with no front columns interrupting the horizontal path of a bundle. That geometry suits long materials, but the correct arrangement depends on load depth, weight and the spacing of support points. Stock length alone is not enough to select a system.

For a fabrication operation, purchased bundles and partly consumed stock may behave differently. Record both conditions, including loose pieces, banded packs and irregular sections. Pipe, tube, lumber and sheet products each need an appropriate support method. Conventional selective pallet rack serves packaged pallet loads, whereas long-stock storage must accommodate withdrawal and lateral movement without forcing material through a narrow framed opening.

(216) 434-6607

How Cantilever Rack Carries Uneven Material Loads

A practical specification accounts for each arm's demand as well as the complete upright assembly. Bundle shape, stiffness and center of gravity affect how the weight reaches its supports.

Depth matched to arm reach

Measure the complete pack, including spacers or packaging that remain during storage. Choose sufficient arm length to support it in the intended position. Unplanned projection beyond the support area changes handling conditions and cannot be treated as extra usable capacity.

Distribution across supports

Do not divide total bundle weight by the number of arms without considering contact. Bent sections or uneven bearers can shift weight toward fewer supports. Establish upright spacing around permissible material overhang and the shortest length expected in that location.

Faces and working aisles

A single-sided row can serve a perimeter location; a double-sided arrangement offers two loading faces in an interior area. Both need clearance for bases and stock withdrawal. Double-sided capacity must match the specified loading of each face, including unequal inventory levels.

Environment and handling envelope

Indoor layouts must accommodate forklift approach and the sweep of the longest carried piece. Side-loader access can change aisle requirements without eliminating transfer space. Outdoor storage requires components and finishes suited to exposure, with material protection considered separately from the rack itself.

Cantilever Storage Rack for Canton's Fabrication Mix

Evaluate the heaviest bundle alongside the least rigid material. Heavy bar may determine capacity while thin sections determine support spacing. Considering both prevents a specification that suits one stock family but leaves another poorly supported.

Keep selection tied to the actual lifting method. Fork spacing, attachment dimensions and the way operators separate bundles affect arm positions and clearances. A storage drawing should reflect how stock reaches the machine, not merely how much fits in a row.

Our new-equipment supply and installation offering is a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997. We establish the intended loading arrangement and installation scope so the selected components correspond to the work they will perform.

Free warehouse consultation

CAD layout with position counts

Installation by experienced crews we schedule and manage

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Long Materials in Canton's Industrial Areas

North Industrial and the Belden Village industrial area are useful local reference points for steel fabrication and machinery supply requirements. These businesses may keep finished lengths near building products or machine components. Where different inventories share a warehouse, reserve space for measuring, separating and lifting long stock rather than counting every open strip as another storage position.

metal fabrication

machinery supply