What should an Aurora first-time warehouse tenant measure?

Bring material lengths, loaded depths, bundle weights and handling-equipment dimensions. Include the shortest items as well as the longest; short pieces may not bridge the proposed upright spacing and can require a different support arrangement.

Can assembly stock and distribution bundles share one row?

They can when the support and loading requirements align. Separate arm levels or zones help distinguish frequent production picks from packaged outbound material, especially where the two activities would otherwise compete for the same approach.

Should stock near Eggleston Road use double-sided rows?

The address alone cannot decide that. A double-sided layout needs a usable aisle on each face; a wall-adjacent single-sided row may preserve a clearer route when receiving and picking share limited space.

How do we choose between cantilever rack and selective bays?

Choose by load shape and retrieval method. Loose extended stock benefits from open arms, whereas packaged pallet loads often suit selective access. A combined layout can keep both available without treating them as interchangeable systems.

Cantilever Rack system inside a Ohio warehouse

Aurora, Ohio

Cantilever Rack in Aurora, OH

Name: Cleveland Pallet Rack
Address: 11811 Shaker Blvd., Cleveland, OH, 44120, US
Telephone: (216) 434-6607
Price range: $$

Cantilever rack in Aurora gives long fabricated goods a defined storage position instead of leaving them across working floor space. Open-front arms project from uprights without front columns, letting operators approach bar, pipe, tube and lumber along their length.

For mixed light manufacturing and industrial distribution, the starting point is the actual stock list. Different lengths, bundle weights and retrieval methods can call for separate arm arrangements rather than one repeated configuration throughout the building.

(216) 434-6607

Cantilever racking selected around your material

We start with the load resting on the arms, not an assumed pallet footprint. Record the shortest piece, longest bundle, maximum weight and packaging condition so the proposed supports reflect what operators will actually place in storage.

As a division of Warehouse Equipment & Supplies Co., we have been supplying and installing storage equipment since 1997. Our scope here is new equipment, with product selection and installation planning connected from the first layout discussion.

Cantilever rack works differently from selective pallet rack: arms carry extended materials while selective bays generally support palletized units on beams. Keeping both systems where each fits avoids forcing loose lengths into pallet positions or sacrificing pallet access for occasional long stock.

Free warehouse consultation

CAD layout with position counts

Installation by experienced crews we schedule and manage

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Support choices for Aurora production spaces

On Aurora Industrial Parkway, a specialty manufacturing layout should keep fabricated lengths close to their next operation without blocking assembly access. Along Eggleston Road, an industrial distribution plan may instead prioritize unloading and sorting space. These are different placement decisions: production proximity favors a dedicated material face, while mixed receipts require room to identify bundles before loading arms. SR-43 and SR-82 access does not determine the aisle dimension inside either building.

light manufacturing

industrial distribution

How cantilever rack carries mixed lengths

A usable arrangement connects support geometry with the handling route. Review each of these choices against the heaviest load and the least convenient retrieval, rather than only the average bundle.

Arm reach and supported depth

Arm length must accommodate the material depth and its intended placement. Establish how bundles sit against the upright and whether sheet goods need additional support surfaces; a bare pair of arms is not automatically suitable for every sheet format.

Capacity across the supports

Specify load distribution over the arms actually engaged. A total bundle weight alone does not establish acceptable loading: unequal contact, short pieces and concentrated weight can change the demand on an individual arm and upright.

One face or two

Single-sided rows can serve a perimeter position, while double-sided uprights offer access from opposing aisles. Count the space consumed by both handling faces before treating a central row as additional usable storage.

Handling and exposure

Check side-loader or forklift aisle sweep with the longest carried piece. Indoor and outdoor applications also need different exposure considerations, so identify the proposed location and material protection needs before selecting the equipment finish.

Putting new cantilever storage rack into service

Inventory review separates bar and tube bundles from lumber, sheet and irregular fabricated pieces, with weights documented for each handling unit.

Layout development maps upright spacing, arm elevations and approach directions alongside production access, door openings and the equipment operating envelope.

Equipment selection identifies new uprights, bases, arms and bracing as a compatible arrangement, with capacity information tied to the proposed loading pattern.

Installation coordination establishes a receiving area for components and a work sequence, followed by a review of intended arm loading with your operating team.

Compare storage approaches before assigning every material to the same row.

Aurora warehouse storage options Explore cantilever configurations Flow rack for rotating pallets Drive-in storage for repeated loads

Fabricated lengths awaiting the next manufacturing operation.

Pipe and tube bundles requiring access without front obstructions.

Lumber packs separated by dimension and handling frequency.

Sheet material with support matched to its form.

Call (216) 434-6607