Will plastic and wooden bases run on one roller specification?

Sometimes, but only after both contact patterns and load ranges are confirmed. The outside pallet dimension alone is insufficient. Provide underside photos and representative samples so roller contact and braking can be evaluated before equipment selection.

Can lanes accommodate a seasonal change in SKU mix?

They can be reassigned within the approved pallet and load limits. Lane depth does not change simply because the stock changes. Review expected seasonal quantities so slow items do not occupy deep lanes intended for recurring full-pallet turnover.

When is pushback a better choice for an Aurora distributor?

Consider it when same-side loading and picking are important and last-in, first-out rotation is acceptable. Gravity-fed opposing faces are more appropriate where receiving order must be preserved. Compare complete aisle footprints rather than rack depth by itself.

Should case picking take place at every pallet face?

Not necessarily; frequent small picks may be better in a separate case-picking area. Decide whether operators withdraw whole pallets or break them down at the face, because those tasks create different replenishment and working-space requirements.

Pallet Flow Rack system inside a Ohio warehouse

Aurora, Ohio

Pallet Flow Rack in Aurora, OH

Name: Cleveland Pallet Rack
Address: 11811 Shaker Blvd., Cleveland, OH, 44120, US
Telephone: (216) 434-6607
Price range: $$

Pallet flow rack in Aurora suits repeat pallet quantities that must leave storage in the order they entered. Inclined roller lanes carry the load toward a separate withdrawal aisle, leaving replenishment on the other side. That arrangement can support date-sensitive supplies, but it needs enough volume per item to justify reserving a complete lane for that item.

Light manufacturing and industrial distribution often combine packaged materials of unlike size. Separate the consistent, high-volume families from exceptions before discussing a gravity flow rack layout. Pallets with unstable packaging or changing base dimensions may belong in directly accessible reserve locations rather than being forced into a common roller specification.

(216) 434-6607

Gravity Flow Rack Components That Control Movement

Pallet flow racking combines gravity travel with controlled pallet spacing. The incline is selected around the roller assembly and load characteristics, not chosen as a remedy for poor pallets.

Document the underside first

Specify pallet bottom-board direction, contact surfaces and dimensional variation. Plastic pallets and wooden pallets may require different arrangements even when their outside length matches.

Match braking to the range

Speed controllers govern how rapidly pallets approach the withdrawal face. Very light units must still travel, while the heaviest units must remain controlled.

Keep opposite faces workable

A FIFO row consumes room for replenishment and retrieval, not just its roller depth. Check mast clearance at the highest entry and space for truck alignment at both ends.

Separate unit loads during picking

A selected separator arrangement can isolate the leading pallet from the pressure of following loads. Verify pallet engagement and reset action with representative units.

Pallet Flow Rack Fit for Aurora Inventory

Begin the inventory review with SKU quantities at both normal and peak levels. A deep position count can look attractive while masking the space lost to half-empty lanes. Assign shorter depths where replenishment lots are smaller and examine whether several lanes of a fast item are needed to maintain loading access.

Since 1997, Warehouse Equipment & Supplies Co. has supplied and installed warehouse equipment; this site operates as its division. We quote new material with the load schedule and operating arrangement stated clearly, so the purchasing decision reflects usable capacity rather than only the drawn number of pallets.

Free warehouse consultation

CAD layout with position counts

Installation by experienced crews we schedule and manage

Pallet flow rack lanes with gravity rollers installed

Flow racking system loaded with pallets at the pick face

Aurora Receiving and Inventory Patterns

SR-43 and SR-82 connect Aurora's industrial and commercial corridors, where receipts for light manufacturing may share a building with distribution orders. Account for those separate destinations when choosing the two working faces. Newer bulk or flex space can provide more height, but doors, column lines and outbound staging still determine which rows can be replenished without conflicting with picking.

light manufacturing

industrial distribution

Pallet Flow Racking Consultation for Mixed Loads

For the design consultation, gather a SKU list with replenishment quantities, date rules and pallet dimensions. Mark loads that cannot share a lane specification, including unusually light cartons or packages extending beyond the base.

We map row depth, loading faces and the circulation needed around the lift trucks. The proposal should show which stock remains in selective rack and which recurring families justify gravity lanes. Case picking can be evaluated separately rather than consuming a full pallet withdrawal face for small orders.

Installation is coordinated through experienced crews we schedule and manage. Delivery staging, assembly areas and representative-load checks are agreed before the work starts. Confirm roller travel, braking response and the approved loading sequence, then provide operating limits tied to the supplied new system.

Compare the storage options below against the inventory planned for your Aurora building.

Aurora warehouse storage Pallet flow system overview Pushback options in Aurora Aurora carton picking

Dated pallets with defined rotation rules

Repeated shipments of the same SKU

Separated receiving and retrieval movements

Unit loads approved for roller travel

Call (216) 434-6607

Recent Installations

Racking projects completed for warehouses across Greater Cleveland and Northeast Ohio.

View More Projects

Get a Pallet Flow Rack Quote for Your Aurora Warehouse

Bring the changing portions of your Aurora inventory into the quote discussion, not just the fastest item. A pallet flow rack proposal should identify exceptions and leave accessible positions for loads that do not belong on rollers.